Stenner Pump Company - 170DM1 Classic Series Double Head Adjustable Output Pump

170DM1 Specifications Summary

25 psi (1.72 bar) Double Head Adjustable Output Pump max 10 gpd (38 lpd)

Outputs @ 60Hz
Gallons per day: 0.5 to 10.0
Gallons per hour: 0.02 to 0.42
Liters per day: 1.9 to 37.9
Liters per hour: 0.08 to 1.58
Ounces per minute: 0.04 to 0.89
Milliliter per minute: 1.32 to 26.32

Outputs @ 50Hz
Liters per day: 1.5 to 30.3
Liters per hour: 0.06 to 1.26
Milliliters per minute: 1.04 to 21.04

Discharge Pressure
0-25 psi (0-1.7 bar)

Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

Gear Motor
Shaded pole, class B, 1/30 HP approx.; 44 rpm

Maximum Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
12.7 x 5.3 x 6.0 in (32.3 x 13.4 x 15.2 cm)

Shipping Weight
10 lbs (5 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube: Santoprene® FDA approved
Suction/Discharge Tubing, Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings, Check Valve Fittings: gray fittings: Type 1 Rigid PVC, NSF listed, black fittings: PP, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA , CE, ETL to NSF 50, WQA to NSF 61

Accessories shipped with each pump
6 connecting nuts 1/4" or 3/8"
6 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
2 injection fittings
2 weighted strainers
2 20' rolls of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
2 additional pump tubes
1 mounting bracket
1 installation manual