Stenner Pump Company - 25BDF2HP-7 BDF Series Programmable 7-day Timer Pump

25BDF2HP-7 Specifications Summary

100 psi (6.9 bar) Programmable 7-day Timer Pump max 4.5 oz (134 ml)/event

Outputs @ 60Hz
Maximum gallons per day: 1.0
Maximum liters per day: 3.8
Ounces per dose hour: 0.21 to 4.41
Milliliters per dose hour: 6 to 134

Discharge Pressure
26-100 psi (1.8-6.9 bar)

Voltage
120V 60Hz

Gear Motor
Shaded pole, class B; 1/30 HP;
approx. 12 rpm

Maximum Suction Lift
25 ft (7.6 m) verical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.2

Dimensions (l x w x h)
10.1 x 7.0 x 6.1 in (25.7 x 17.8 x 15.5 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube & Check Valve Duckbill: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing, Ferrules 1/4": Polyethylene, FDA approved
Tube Fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nut: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings
UL, CSA

Accessories shipped with each pump
3 connecting nuts 1/4"
3 ferrules 1/4"
1 injection check valve
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4"
2 additional latches
1 installation manual