45MPHP10 Specifications Summary
100 psi (6.9 bar) Single Head Fixed Output Pump max 10 gpd (38 lpd)
Outputs @ 60Hz
Gallons per day: 10
Gallons per hour: 0.42
Liters per day: 37.9
Liters per hour: 1.58
Ounces per minute: 0.89
Milliliter per minute: 26.32
Outputs @ 50Hz
Liters per day: 30.3
Liters per hour: 1.26
Milliliters per minute: 21.04
Discharge Pressure
26-100 psi (1.8-6.9 bar)
Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International
Gear Motor
Shaded pole, class B; 1/30 HP
approx. 26 rpm
Maximum Suction Lift
25' (7.6 m) vertical lift, based on water
Maximum Operating Temperature
125° F (52° C)
Amp Draw
1.7 120V; 0.9 220V, 230V, 250V
Dimensions (l x w x h)
8.0 x 5.3 x 6.0 in.
(20.3 x 13.4 x 15.2 cm)
Shipping Weight
8 lbs (3.6 kg)
Materials of Construction
All Housings: Polycarbonate
Pump Tube & Check Valve Duckbill: Santoprene® FDA approved
Pump Tube: Tygothane® FDA approved; CV Duckbill w/Tygothane tube: Pellathane®
Pump Head Latches: Polypropylene
Suction/Discharge Tubing; Ferrules 1/4", 6mm: Polyethylene, FDA approved
Tube Fittings: Gray fittings: Type 1 Rigid PVC, NSF listed, Black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 rigid PVC body with Type 1 rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: stainless steel
Santoprene® is a registered trademark of Exxon Mobil Corporation
Tygothane® is a registered trademark of Saint-Gobain Performance Plastics
Pellathane® is a registered trademark of The Dow Company
Refer to the chemical resistance guide for compatibility
Agency listings (vary by models)
Santoprene®: UL, CSA, CE, WQA to NSF 61
Tygothane®: UL, CSA, CE
Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection check valve
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube, 2 additional latches
1 mounting bracket, 1 manual