85M5 Specifications Summary
25 psi (1.72 bar) Single Head Adjustable Output Pump max 85 gpd (322 lpd)
Outputs @ 60Hz
Gallons per day: 4.3 to 85.0
Gallons per hour: 0.18 to 3.54
Liters per day: 16.3 to 321.8
Liters per hour: 0.68 to 13.40
Ounces per minute: 0.38 to 7.55
Milliliter per minute: 11.32 to 223.40
Outputs @ 50Hz
Liters per day: 13.0 to 257.4
Liters per hour: 0.54 to 10.73
Milliliters per minute: 9.03 to 178.75
Discharge Pressure
0-25 psi (0-1.7 bar)
Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International
Gear Motor
Shaded pole, class B; 1/30 HP;
approx. 44 rpm
Maximum Suction Lift
25' (7.6 m) vertical lift, based on water
Maximum Operating Temperature
125° F (52° C)
Amp Draw
1.7 120V; 0.9 220V, 230V, 250V
Dimensions (l x w x h)
10.6 x 5.3 x 6.0 in.
(26.9 x 13.4 x 15.2 cm)
Shipping Weight
9 lbs (4 kg)
Materials of Construction
All Housings: Polycarbonate
Pump Tube: Santoprene® FDA approved
Pump Tube: Tygothane® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing; ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: Gray fittings: Type 1 Rigid PVC, NSF listed, Black fittings: PP, NSF listing
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel
Santoprene® is a registered trademark of Exxon Mobil Corporation
Tygothane® is a registered trademark of Saint-Gobain Performance Plastics
Refer to the chemical resistance guide for compatibility
Agency listings (vary by models)
Santoprene®: UL, CSA , CE, ETL to NSF 50, WQA to NSF 61
Tygothane®: UL, CSA, CE
Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection fitting
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube
2 additional latches
1 mounting bracket
1 installation manual