Stenner Pump Company - 85MPHP5 Classic Series Single Head Fixed Output Pump

85MPHP5 Specifications Summary

100 psi (6.9 bar) Single Head Fixed Output Pump max 3 gpd (11 lpd)

Outputs @ 60Hz
Gallons per day: 5.0
Gallons per hour: 0.21
Liters per day: 18.9
Liters per hour: 0.79
Ounces per minute: 0.44
Milliliter per minute: 13.3

Outputs @ 50Hz
Liters per day: 15.1
Liters per hour: 0.63
Milliliters per minute: 10.49

Discharge Pressure
26-100 psi (1.8-6.9 bar)

Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

Gear Motor
Shaded pole, class B; 1/30 HP;
approx. 44 rpm

Maximum Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
8.0 x 5.3 x 6.0 in. (20.3 x 13.4 x 15.2 cm)

Shipping Weight
8 lbs (3.6 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube & Check Valve Duckbill: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing, Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: Gray fittings: Type 1 Rigid PVC, NSF listed, Black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA, CE, WQA to NSF 61

Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection check valve
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube
2 additional latches
1 mounting bracket
1 installation manual