Plastic Water Meter


• Reed switch
• Dry contact closure
• Power not required
• Certified with Water Quality Association
under NSF/ANSI-372 (low lead)

Material
Body: Engineered reinforced plastic
Internals: Engineered Thermoplastic
Magnet: Alnico

Accuracy
± 2% of Reading

Maximum Operating
Temperature: 35°- 105° F (1.7°- 40° C)
Pressure: 15-100 psi (1.0-6.9 bar)

Maximum Current
20mA

Maximum Voltage
24 VDC or VAC

Min. Max.
Plastic Meters Pulse Rate Flow Rate (gpm) Part Number
3/4" 1 pulse/gallon 0.25 22 JLP0750-1PPG
1" 1 pulse/gallon 0.75 50 JLP1000-1PPG
3/4" 2 pulses/gallon 0.25 22 JLP0750-2PPG
1" 2 pulses/gallon 0.75 50 JLP1000-2PPG

Dimensions (A x B x C x D)

3/4"
7.5" (19.1 cm) x 11.5" (29.2 cm) x 1" x 3/4"

1"
10.25" (26.6 cm) x 15.25" (38.8 cm) x 1.25" x 1"







STENNER PUMP COMPANY
Jacksonville, FL U.S.A    800.683.2378    904.641.1666    Copyright © 2007-2012 Stenner Pump Company. All Rights Reserved.