Stenner Pump Company - SVP1H7 Variable Speed Pump

SVP1H7 Specifications Summary

100 psi (6.9 bar) Variable Speed Pump max 40 gpd (151 lpd)

Outputs @ 50Hz & 60Hz
Gallons per day: 2.0 to 40.0
Gallons per hour: 0.08 to 1.67
Liters per day: 7.6 to 151.4
Liters per hour: 0.32 to 6.31
Ounces per minute: 0.18 to 3.55
Milliliter per minute: 5.27 to 105.14

Discharge Pressure
26-100 psi (1.8-6.9 bar)

Voltage
120V 50/60Hz; 220V 50/60Hz
230V 50/60Hz; 250V 50/60Hz International

Gear Motor
12VDC; approx. 47 rpm

Maximum Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.5

Dimensions (l x w x h)
10.1 x 7.0 x 6.1 in (25.7 x 17.8 x 15.5 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube & Check Valve Duckbill: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing; Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: Gray fittings: Type 1 Rigid PVC, NSF listed, Black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA , CE, WQA to NSF 61

Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection check valve
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube
2 additional latches
1 installation manual