Stenner Pump Company - SVP1L4 Variable Speed Pump

SVP1L4 Specifications Summary

25 psi (1.7 bar) Variable Speed Pump max 60 gpd (227 lpd)

Outputs @ 50Hz & 60Hz
Gallons per day: 3.0 to 60.0
Gallons per hour: 0.13 to 2.5
Liters per day: 11.4 to 227.1
Liters per hour: 0.48 to 9.46
Ounces per minute: 0.27 to 5.33
Milliliter per minute: 7.92 to 157.71

Discharge Pressure
0-25 psi (0-1.7 bar)

Voltage
120V 50/60Hz; 220V 50/60Hz
230V 50/6Hz; 250V 50/60Hz International

Gear Motor
12VDC; approx. 47 rpm

Maximum Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.5

Dimensions (l x w x h)
10.1 x 7.0 x 6.1 in (25.7 x 17.8 x 15.5 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing, Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: Gray fittings: Type 1 Rigid PVC, NSF listed, Black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA, CE, WQA to NSF 61

Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection fitting
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube
2 additional latches
1 installation manual