Stenner Pump Company - SVP4H2 Variable Speed Pump w/4-20mA

SVP4H2 Specifications Summary

100 psi (6.9 bar) Variable Speed Pump /w4-20mA max 17 gpd (64 lpd)

Outputs @ 50Hz & 60Hz
Gallons per day: 0.8 to 17.0
Gallons per hour: 0.03 to 0.71
Liters per day: 3.0 to 64.4
Liters per hour: 0.13 to 2.68
Ounces per minute: 0.07 to 1.51
Milliliter per minute: 2.08 to 44.65

Max. input signal V
48 VDC

Input signal resistance
128 ohm

Discharge Pressure
26-100 psi (1.7-6.9 bar)

Voltage
120V 50/60Hz; 220V 50/60Hz
230V 50/60Hz; 250V 50/60Hz International

Motor
DC Variable Speed; 45 rpm; 1/30 HP

Suction Lift
25' (7.6 m)

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.5

Dimensions (l x w x h)
10.1 x 7.0 x 6.1 in
(25.7 x 17.8 x 15.5 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Lexan® polycarbonate plastic
Pump tube & check valve duckbill: Santoprene® FDA approved
Pump tube: Tygothane® FDA approved
Checkvalve duckbill (w/Tygothane tube): Pellathane®
Suction/discharge tubing & ferrules (1/4" & 6 mm): LDPE polyethylene,
NSF/FDA approved
Tube fittings, connecting nuts, check valve fitting,
weighted strainer: Type 1 Rigid PVC-NSF listed
All fasteners: Stainless Steel
  Lexan® is a registered trademark of General Electric.
  Santoprene® is a registered trademark of Advanced Elastomer system
  Tygothane® is a registered trademark of Saint-Gobain Performance Plastics
  Pellathane® is a registered trademark of The Dow Company
  Refer to the chemical resistance guide for pump tube material, PVC, LDPE compatibility

Agency listings
Santoprene®: UL, CSA , CE, NSF-61
Tygothane®: UL, CSA, CE

Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection check valve
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 spare pump tube
1 installation manual