Stenner Pump Company - T44 Series Triple Head Adjustable Output Pump

T44JH1 Specifications Summary

100 psi (6.9 bar) Triple Head Adjustable Output Pump max 0.45 oz (1.31mL)/head

Triple Head Pump w/ #1 pump tube
T44JH1P1S w/ ¼" suction/discharge tubing
T44JH1P3S w/ 3/8" suction/discharge tubing

Outputs per head
Ounces per minute: 0.03 to 0.44
Milliliters per minute: 0.76 to 13.1

Discharge Pressure
26 psi (1.72 bar) - 100 psi (6.9 bar)

Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

Motor
shaded pole; 44 rpm; 1/24 HP

Suction Lift
25'; 7.6 m

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
12.4 x 5.3 x 6.0 in
(31.5 x 13.5 x 15.2 cm)

Shipping Weight
13 lbs (6 kg)

Materials of Construction
All Housings: Lexan® polycarbonate plastic
Pump tube & check valve duckbill: Santoprene® FDA approved
Suction/discharge tubing & ferrules (1/4" & 6 mm): LDPE polyethylene,
NSF/FDA approved
Tube fittings, connecting nuts, check valve fitting,
weighted strainer: Type 1 Rigid PVC-NSF listed
All fasteners: Stainless Steel
  Lexan® is a registered trademark of General Electric.
  Santoprene® is a registered trademark of Advanced Elastomer system
  Refer to the chemical resistance guide for pump tube material, PVC, LDPE compatibility

Accessories shipped with each pump
9 connecting nuts 1/4" or 3/8"
9 ferrules w/ 1/4" & 6 mm OR 2 ferrules with 3/8"
3 injection check valves
3 weighted strainers
3 20' rolls of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
2 mounting brackets
1 installation manual