Stenner Pump Company - 100DMPHP5 Classic Series Double Head Fixed Output Pump

100DMPHP5 Specifications Summary

100 psi (6.9 bar) Double Head Fixed Output Pump max 6 gpd (23 lpd)

Outputs @ 60Hz
Gallons per day: 6.0
Gallons per hour: 0.25
Liters per day: 22.7
Liters per hour: 0.95
Ounces per minute: 0.53
Milliliter per minute: 15.76

Outputs @ 50Hz
Liters per day: 18.2
Liters per hour: 0.76
Milliliters per minute: 12.6

Discharge Pressure
26-100 psi (1.8-6.9 bar)

Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

Gear Motor
Shaded pole, class B, 1/30 HP;
approx. 26 rpm

Maximum Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
10.2 x 5.3 x 6.0 in (25.9 x 13.4 x 15.2 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube & Check Valve Duckbill: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing, Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: gray fittings: Type 1 Rigid PVC, NSF listed, black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA , CE, WQA to NSF 61

Accessories shipped with each pump
6 connecting nuts 1/4" or 3/8"
6 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
2 injection check valves
2 weighted strainers
2 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
2 additional pump tube
4 additional latches
1 mounting bracket
1 installation manual