170DM2 Specifications Summary
25 psi (1.72 bar) Double Head Adjustable Output Pump max 34 gpd (129 lpd)
Outputs @ 60Hz
Gallons per day: 1.7 to 34.0
Gallons per hour: 0.07 to 1.42
Liters per day: 6.4 to 128.7
Liters per hour: 0.27 to 5.36
Ounces per minute: 0.15 to 3.02
Milliliter per minute: 4.44 to 89.38
Outputs @ 50Hz
Liters per day: 5.1 to 103.0
Liters per hour: 0.21 to 4.29
Milliliters per minute: 3.54 to 71.55
Discharge Pressure
0-25 psi (0-1.7 bar)
Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International
Gear Motor
Shaded pole, class B, 1/30 HP;
approx. 44 rpm
Maximum Suction Lift
25' (7.6 m) vertical lift, based on water
Maximum Operating Temperature
125° F (52° C)
Amp Draw
1.7 120V; 0.9 220V, 230V, 250V
Dimensions (l x w x h)
12.7 x 5.3 x 6.0 in (32.3 x 13.4 x 15.2 cm)
Shipping Weight
10 lbs (5 kg)
Materials of Construction
All Housings: Polycarbonate
Pump Tube: Santoprene® FDA approved
Pump Tube: Tygothane® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing, Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: gray fittings: Type 1 Rigid PVC, NSF listed, black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel
Santoprene® is a registered trademark of Exxon Mobil Corporation
Tygothane® is a registered trademark of Saint-Gobain Performance Plastics
Refer to the chemical resistance guide for pump tube material, PVC, LDPE compatibility
Agency listings (vary by models)
Santoprene®: UL, CSA , CE, WQA to NSF 61
Tygothane®: UL, CSA, CE
Accessories shipped with each pump
6 connecting nuts 1/4" or 3/8"
6 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
2 injection fittings
2 weighted strainers
2 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
2 additional pump tubes
4 additional latches
1 mounting bracket
1 installation manual