Stenner Pump Company - 25BDF1 BDF Series Programmable 24-hour Timer Pump

25BDF1 Specifications Summary

25 psi (1.7 bar) Programmable 24-hour Timer Pump max 1.3 oz (39 ml)/event

Outputs @ 60Hz
Gallons per day: 0.3
Liters per day: 1.1
Ounces per hour: 0.06 to 1.26
Milliliter per hour: 2 to 39

Discharge Pressure
0-25 psi (0-1.7 bar)

Voltage
120V 60Hz

Gear Motor
Shaded pole, class B, 1/30 HP;
approx. 12 rpm

Maximum Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.2

Dimensions (l x w x h)
10.1 x 7.0 x 6.1 in (25.7 x 17.8 x 15.5 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing, Ferrules 1/4": Polyethylene, FDA approved
Tube Fittings: Polypropylene, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA

Accessories shipped with each pump
3 connecting nuts 1/4"
3 ferrules 1/4"
1 injection fitting
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4"
2 additional latches
1 installation manual