Stenner Pump Company - 45MP3 Classic Series Single Head Fixed Output Pump

45MP3 Specifications Summary

25 psi (1.72 bar) Single Head Fixed Output Pump max 22 gpd (83 lpd)

Outputs @ 60Hz
Gallons per day: 22.0
Gallons per hour: 0.92
Liters per day: 83.3
Liters per hour: 3.47
Ounces per minute: 1.96
Milliliter per minute: 57.85

Outputs @ 50Hz
Liters per day: 66.6
Liters per hour: 2.78
Milliliters per minute: 46.25

Discharge Pressure
0-25 psi (0-1.7 bar)

Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

Gear Motor
Shaded pole, class B; 1/30 HP;
approx. 26 rpm

Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
8.0 x 5.3 x 6.0 in. (20.3 x 13.4 x 15.2 cm)

Shipping Weight
8 lbs (3.6 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing; Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: Gray fittings: Type 1 Rigid PVC, NSF listed, Black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: Type 1 Rigid PVC or Polypropylene
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
ceramic weight, NSF listed
All fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for pump tube material, PVC, LDPE compatibility

Agency listings vary by models
UL, CSA , CE, WQA to NSF 61

Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection fitting
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube
2 additional latches
1 mounting bracket
1 installation manual