Stenner Pump Company - 85MHP5 Classic Series Single Head Adjustable Output Pump

85MHP5 Specifications Summary

100 psi (6.9 bar) Single Head Adjustable Output Pump max 5 gpd (19 lpd)

Outputs @ 60Hz
Gallons per day: 0.3 to 5.0
Gallons per hour: 0.01 to 0.21
Liters per day: 1.1 to 18.9
Liters per hour: 0.05 to 0.79
Ounces per minute: 0.03 to 0.44
Milliliter per minute: 0.76 to 13.13

Outputs @ 50Hz
Liters per day: 0.9 to 15.1
Liters per hour: 0.04 to 0.63
Milliliters per minute: 0.52 to 10.49

Discharge Pressure
26-100 psi (1.8-6.9 bar)

Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

Gear Motor
Shaded pole, class B; 1/30 HP;
approx. 44 rpm

Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
10.6 x 5.3 x 6.0 in. (26.9 x 13.4 x 15.2 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube & Check Valve Duckbill: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing; Ferrules 1/4" & 6 mm: LDPE polyethylene,
NSF and FDA approved
Tube Fittings, Check Valve Fittings: gray fittings: Type 1 Rigid PVC, NSF listed, black fittings: PP, NSF listed
Connecting Nut: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA , CE, ETL to NSF 50, WQA to NSF 61

Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection check valve
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube
1 mounting bracket
1 installation manual